Bittboy PocketGo
Reference Price
180.01 lei
$40 USD
Best Price Now
—
Currently unavailable
Historical Lowest
·
Historical Lowest
—
No history yet
Bittboy PocketGo is a gaming handheld launched in 2019. Powered by F1C100S (1-core, 702 MHz), 32 MB RAM. Features a 2.4" IPS LCD display (320 x 240). 1000 mAh battery. Runs Custom Firmware.
Color
Preloaded Content Notice
This device may ship with preloaded ROMs or sample game files. Under U.S. copyright law (DMCA Section 1201 and 17 U.S.C. § 117), creating or distributing ROMs of copyrighted games without authorization is generally prohibited. Personal backup copies of games you legally own may fall under fair use exceptions — consult an attorney for specifics.
No active listings
We haven't tracked any in-stock prices for this console yet. Check back soon or browse similar consoles.
Similar Consoles
Based on category & score
Bittboy PocketGo is a gaming handheld launched in 2019. Powered by F1C100S (1-core, 702 MHz), 32 MB RAM. Features a 2.4" IPS LCD display (320 x 240). 1000 mAh battery. Runs Custom Firmware.
Under the hood sits the Allwinner F1C100S SoC, a single-core ARM926EJ-S processor clocked between 533 and 702 MHz, paired with a 2D accelerator and 32 MB of SDRAM. It is built for efficiency rather than raw power. 8-bit and 16-bit systems such as the NES, Game Boy, Game Boy Color, Master System, Game Gear, Genesis / Mega Drive and TurboGrafx-16 / PC Engine are its home turf, along with a long list of Atari machines, home computers like the Commodore 64, MSX and ZX Spectrum, and rarities such as the Vectrex, WonderSwan and Watara Supervision. Game Boy Advance mostly runs fine, while some non-FX SNES titles and 2D PlayStation games run ok but can be laggy.
The 2.4-inch IPS display offers a 320 x 240 QVGA resolution at 60 Hz, with a 4:3 aspect ratio that suits classic games perfectly and a sharp density of around 167 ppi. A tempered glass lens with a convex bezel covers the panel for added durability. Early units suffered from screen tearing, which has improved since launch.
Controls follow a classic layout: a cross-shaped D-pad in the upper position, four face buttons, L1 and R1 shoulder buttons and a dedicated reset button. There are no analog sticks, but rumble adds physical feedback during play. Volume is adjusted with a wheel, brightness through a button combination, and power via a physical switch.
A 1000 mAh battery powers the device and charges over Micro USB. Sound comes from a single front-facing mono speaker, with a 3.5mm headphone jack for private listening, and AV Out lets you connect the console to a TV.
Games are stored on a microSD card. The PocketGo runs NxHope, and modding is permitted, giving tinkerers room to customise their experience.
Ideal for: retro fans on a tight budget, collectors who want an ultra-portable 8-bit and 16-bit machine, and anyone looking for a simple, pocketable handheld for quick nostalgic sessions.
- Manufacturer
- Allwinner
- SoC
- Allwinner F1C100S
- Model
- F1C100S
- Architecture
- ARM926EJ-S
- Cores
- 1
- Threads
- 1
- Frequency
- 533 - 702 MHz
- Instruction Set
- ARM
- Chipset
- 2D accelerator
- Capacity
- 32 MB
- Technology
- SDRAM
- Size
- 2.4
- Technology
- IPS
- Resolution
- 320 x 240
- Quality
- QVGA
- Refresh Rate
- 60 Hz
- Pixel Density (PPI)
- 166.67
- Aspect Ratio
- 4:3
- Lens
- Tempered Glass (Convex Bezel)
- Capacity
- 1000 mAh
- Analog Sticks
- None
- D-Pad
- Cross
- D-Pad Placement
- Upper
- Shoulder Buttons
- L1, R1
- Extra Buttons
- Reset
- Additional Features
- Rumble
- Speaker Type
- Single Mono
- Speaker Position
- Front facing
- Charge Port
- Micro USB
- Video Output
- AV Out
- Audio Output
- 3.5mm Headphone
- Card Support
- microSD
- Operating System
- NxHope
- Custom OS Support
- NxHope
- Dimensions
- 123 mm x 56 mm x 14 mm
- Weight
- 89 g
- Body Material
- Plastic
Modding officially supported
The manufacturer officially permits or encourages modding (custom firmware, OS replacement, hardware modifications). Warranty remains valid under normal use.
Arcade · 1 platform
Atari · 5 platforms
Bandai · 2 platforms
Coleco · 1 platform
Commodore · 3 platforms
Epoch · 1 platform
Fairchild · 1 platform
GCE · 1 platform
Magnavox · 1 platform
Mattel · 1 platform
Microsoft · 1 platform
Microsoft/ASCII · 1 platform
NEC · 2 platforms
Nintendo · 5 platforms
Other · 1 platform
SNK · 2 platforms
Sega · 3 platforms
Sinclair · 1 platform
Sony · 1 platform
Watara · 1 platform
Pros & Cons
Pros
- Portability
Cons
- Screen tearing (better now than launch)
No compatible accessories found
Check back later — we're adding new accessories regularly.
Videos · 4
Izzy Nobre
youtube
Lohtec
youtube
Wulff Den
youtube
RobinB360
youtube
/
Compliance & Safety
Bittboy PocketGo — 5 marks declared by manufacturer
Regulatory
· 1-
CE Marking
EUConformité Européenne — certifies that the product meets essential EU requirements for safety, health and environmental protection. The mark indicates the manufacturer has assessed the product and confirmed compliance with applicable European legislation (EMC, RoHS, RED directives, etc.). Mandatory for all electronic products sold in the European Economic Area since 1985.
Official source
Environmental
· 2-
RoHS
GlobalRestriction of Hazardous Substances — EU directive limiting 10 hazardous substances in electronics (lead, mercury, cadmium, hexavalent chromium, phthalates, etc.). Limit: 0.1% per substance (0.01% for cadmium). RoHS compliance is part of the CE declaration and mandatory for all electronics sold in the EU.
Official source -
WEEE
EUWaste Electrical and Electronic Equipment — the crossed-out wheeled bin pictogram indicates the obligation to separate electronic waste from household trash. Manufacturers must register with a national collection scheme and cover recycling costs. Consumers can return used devices free of charge at stores or collection centers.
Official source
Safety
· 2-
Not for children under 3
EUSafety warning per Toy Safety Directive 2009/48/EC — product not suitable for children under 3 years due to small parts presenting choking hazard. Applicable to consoles with small detachable accessories (joycons, batteries, short cables). Manufacturer sets the age limit based on safety testing.
Official source -
Electric Hazard
GlobalElectric hazard warning per ISO 7010 — the pictogram indicates the presence of high-voltage components inside. Disassembling without qualified personnel can cause severe electric shock, even after disconnecting from mains (capacitors may retain charge for a long time). DO NOT disassemble unless you are an authorized technician.
Official source
Markings displayed are based on data declared by the manufacturer. Actual product markings may vary by region and revision.
