PowKiddy J6
Reference Price
166.51 lei
$37 USD
Best Price Now
—
Currently unavailable
Historical Lowest
·
Historical Lowest
—
No history yet
PowKiddy J6 is a horizontal retro gaming handheld launched in 2020. Powered by Actions Semiconductor ATS3603 (1-core, 450 MHz), 64 MB RAM. Features a 4.3" IPS display (800 x 480, 5:3). 1000 mAh battery. Runs Proprietary.
Color
Preloaded Content Notice
This device may ship with preloaded ROMs or sample game files. Under U.S. copyright law (DMCA Section 1201 and 17 U.S.C. § 117), creating or distributing ROMs of copyrighted games without authorization is generally prohibited. Personal backup copies of games you legally own may fall under fair use exceptions — consult an attorney for specifics.
No active listings
We haven't tracked any in-stock prices for this console yet. Check back soon or browse similar consoles.
PowKiddy J6 is a horizontal retro gaming handheld launched in 2020. Powered by Actions Semiconductor ATS3603 (1-core, 450 MHz), 64 MB RAM. Features a 4.3" IPS display (800 x 480, 5:3). 1000 mAh battery. Runs Proprietary.
Inside is the Actions Semiconductor ATS3603, a single-core MIPS chip running at 450 MHz, paired with 64 MB of RAM. NES, Game Boy Advance and Master System run fine, and the supported platforms also include Game Boy, Game Boy Color and Sega Genesis / Mega Drive. SNES is playable but usually laggy. PlayStation appears in the platform list too, but given the SNES results, smooth play should not be expected.
The 4.3-inch IPS screen offers 800 x 480 resolution, a 5:3 aspect ratio, roughly 217 ppi and a 60 Hz refresh rate, covered by a plastic lens. It is one of the strongest features of the device at this price.
Controls include an upper cross D-pad, a lower single slidepad, four face buttons and two horizontal shoulder buttons, L1 and R1. Volume has dedicated buttons and power is handled by a switch. There is no rumble. The plastic body measures 172 x 74 x 22 mm and weighs 260 g.
The 1000 mAh battery charges over Mini USB. Connectivity covers USB OTG, a 3.5mm headphone jack, a single rear-facing mono speaker and a microphone. The 16 MB of internal flash storage is complemented by a microSD slot.
The console runs a proprietary operating system, and modding is permitted, although the modest hardware keeps the possibilities limited.
Ideal for: budget-minded players who want to enjoy NES, Game Boy and Game Boy Advance titles on a large screen, as well as kids or newcomers to retro emulation.
- Manufacturer
- Actions
- SoC
- Actions Semiconductor ATS3603
- Model
- Actions Semiconductor ATS3603
- Cores
- 1
- Threads
- 1
- Frequency
- 450 MHz
- Instruction Set
- MIPS
- Capacity
- 64 MB
- Size
- 4.3
- Technology
- IPS
- Resolution
- 800 x 480
- Refresh Rate
- 60 Hz
- Pixel Density (PPI)
- 216.97
- Aspect Ratio
- 5:3
- Lens
- Plastic
- Capacity
- 1000 mAh
- Analog Sticks
- Single slidepad
- Stick Placement
- Lower
- D-Pad
- Cross
- D-Pad Placement
- Upper
- Shoulder Buttons
- L1, R1
- Shoulder Orientation
- Horizontal
- Extra Buttons
- Volume +-
- Speaker Type
- Single Mono
- Speaker Position
- Rear facing
- Ports
- USB OTG
- Charge Port
- Mini USB
- Audio Output
- 3.5mm Headphone
- Internal Storage
- 16 MB
- Card Support
- Flash, microSD
- Operating System
- Proprietary
- Dimensions
- 172 mm x 74 mm x 22 mm
- Weight
- 260 g
- Body Material
- Plastic
Modding officially supported
The manufacturer officially permits or encourages modding (custom firmware, OS replacement, hardware modifications). Warranty remains valid under normal use.
Nintendo · 5 platforms
Sega · 1 platform
Sony · 1 platform
Pros & Cons
Pros
- large 4.3" IPS screen
- very low price
- smooth NES and GBA emulation
- microSD expansion
- 3.5mm headphone jack
- dedicated volume buttons
Cons
- weak single-core CPU
- laggy SNES emulation
- only two shoulder buttons
- Mini USB charging
- small 1000 mAh battery
- rear-facing mono speaker
No compatible accessories found
Check back later — we're adding new accessories regularly.
Videos · 2
Wicked Gamer & Collector
youtube
China Gadgets Reviews
youtube
/
Compliance & Safety
PowKiddy J6 — 5 marks declared by manufacturer
Regulatory
· 1-
CE Marking
EUConformité Européenne — certifies that the product meets essential EU requirements for safety, health and environmental protection. The mark indicates the manufacturer has assessed the product and confirmed compliance with applicable European legislation (EMC, RoHS, RED directives, etc.). Mandatory for all electronic products sold in the European Economic Area since 1985.
Official source
Environmental
· 2-
RoHS
GlobalRestriction of Hazardous Substances — EU directive limiting 10 hazardous substances in electronics (lead, mercury, cadmium, hexavalent chromium, phthalates, etc.). Limit: 0.1% per substance (0.01% for cadmium). RoHS compliance is part of the CE declaration and mandatory for all electronics sold in the EU.
Official source -
WEEE
EUWaste Electrical and Electronic Equipment — the crossed-out wheeled bin pictogram indicates the obligation to separate electronic waste from household trash. Manufacturers must register with a national collection scheme and cover recycling costs. Consumers can return used devices free of charge at stores or collection centers.
Official source
Safety
· 2-
Not for children under 3
EUSafety warning per Toy Safety Directive 2009/48/EC — product not suitable for children under 3 years due to small parts presenting choking hazard. Applicable to consoles with small detachable accessories (joycons, batteries, short cables). Manufacturer sets the age limit based on safety testing.
Official source -
Electric Hazard
GlobalElectric hazard warning per ISO 7010 — the pictogram indicates the presence of high-voltage components inside. Disassembling without qualified personnel can cause severe electric shock, even after disconnecting from mains (capacitors may retain charge for a long time). DO NOT disassemble unless you are an authorized technician.
Official source
Markings displayed are based on data declared by the manufacturer. Actual product markings may vary by region and revision.